Jlg 15VPSP Operator Manual Bedienungsanleitung Seite 31
- Seite / 52
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
SECTION 3 - USER RESPONSIBILITIES & MACHINE CONTROLS
3120796 – JLG Lift – 3-7
Figure 3-6. Decal 1704888 From Figure 3-5.
WARNINGDANGER
IMPORTANT
ELECTROCUTION HAZARD
●
This machine is not electrically insulated.
Maintain a clearance of at least 10 ft. between any part of machine or load and
any electrical line or apparatus charged up to 50,000 volts.
One foot additional clearance is required for each additional 30,000 volts or less.
Allowances must be made for operator error, machine deflection and electrical
line swaying.
●
●
●
Death or serious injury will occur from contact or being too close
to electrical lines.
THIS MACHINE MUST NOT BE USED UNTIL IT
IS INSPECTED AND OPERATING PROPERLY:
●
●
●
●
●
Do not operate this machine unless you have been properly
trained as described in the JLG Operation and Safety Manual
and authorized to operate this machine. Your training includes
reading and understanding the JLG safety and operation
manuals for this model, watching and understanding the JLG
operation and safety video for this model, and knowing your
employers work rules and applicable governmental
regulations
Follow the Instructions in the Operating Manual and Sections
6, 7, and 8 of ANSI A92.6 Self-Propelled Elevating Aerial
Platforms for daily, frequent, and annual inspections. These
may be obtained from your authorized JLG Industries, Inc.
equipment dealer or JLG Industries, Inc.
Do not replace items (i.e. batteries, wheels, counterweight,
etc.) with items of different weight or specification because
this will affect stability of machine.
Do not modify or change machine without written approval
from manufacturer.
Operate this machine with extreme caution. STOP all
operation if malfunction occurs.
Improper use of this machine could cause death or
serious injury.
FALLING HAZARD
●
●
●
●
●
Keep both feet on platform floor.
Do not climb, sit or stand on platform guard rails.
Do not use planks, ladders or similar items in platform to
get added reach.
All guard rails must be securely locked before operation.
Fall protection must be worn at all times, if platform rails
are configured in any open configuration.
Falling from platform could cause death or
serious injury.
TIP-OVER HAZARD
●
●
●
●
●
Do not exceed platform rated capacity or rated number
of people.
Do not expose platform to high winds or horizontal
forces.
Machine must be on smooth, firm and level surface
before elevating platform.
Do not drive near drop offs, holes or other hazards.
Make sure operating surface will support the machine.
Death or serious injury could occur from a
tip-over.
CRUSHING HAZARD
●
●
●
Always look in the direction of movement.
Keep clear of obstructions.
Keep all body parts inside the platform during operation.
Failure to follow instructions could result in
death or serious injury.
FREE-WHEELING INSTRUCTIONS
●
●
●
Brake control handle is located on side of mast.
Brake handle must be in drive position before continuing operation.
Brake handle must be in free-wheeling position before towing or manually moving
machine.
Manufactured by:
JLG Industries Inc.
1-877-JLG-LIFT
WWW.JLG.COM
100 LBS
45 kg
EXTENSION PLATFORM
MOLDED PLATFORM/
MATERIAL TRAY
FORWARD
DRIVE/
STEER
FORWARD
BATTERY CHARGE/
FAULT INDICATOR
SPEED
CONTROL
EMERGENCY
STOP
LOW HIGH
R
F
E
LIFT
LIFT
ENABLE
HORN
UP
DOWN
DRIVE/STEER
ENABLE
- Operators and Safety Manual 1
- – JLG Lift – 2
- FOREWORD - GENERAL 3
- FOREWORD 4
- EFFECTIVITY CHANGES 7
- EFFECTIVITY PAGE 8
- TABLE OF CONTENTS 9
- (Continued) 10
- 1.1 GENERAL 11
- 1.2 PRE-OPERATION 11
- Workplace Inspection 11
- Machine Inspection 12
- 1.3 OPERATION 12
- General 12
- Trip And Fall Hazards 12
- Electrocution Hazards 13
- Tipping Hazards 14
- 1.5 MAINTENANCE 15
- Maintenance Hazards 15
- Battery Hazards 16
- IMPORTANT 17
- 2-2 – JLG Lift – 3120796 18
- 3120796 – JLG Lift – 2-3 19
- 2.6 TORQUE REQUIREMENTS 20
- Battery Charger Operation 21
- 2-6 – JLG Lift – 3120796 22
- 2-8 – JLG Lift – 3120796 24
- 3-2 – JLG Lift – 3120796 26
- Platform Controller 27
- 3120796 – JLG Lift – 3-5 29
- 3-6 – JLG Lift – 3120796 30
- WARNINGDANGER 31
- 3-8 – JLG Lift – 3120796 32
- 3120796 – JLG Lift – 3-9 33
- 34
- SECTION 4. MACHINE OPERATION 35
- (Platform stowed ONLY) 36
- SECTION 4 - MACHINE OPERATION 37
- 4.3 MACHINE OPERATION 37
- Platform Loading 38
- Elevating Platform 38
- 3120796 – JLG Lift – 5-1 41
- System Description 42
- Operation 42
- DETECTION 43
- Accessory Arms 44
- 3120796 – JLG Lift – 5-5 45
- Machine Power Down 46
- Changing the Operator’s Code 46
- Platform Caught Overhead 48
- Post-Incident Inspection 48
- 6.4 INCIDENT NOTIFICATION 48
- 3120796 – JLG Lift – 7-1 49
- 7-2 – JLG Lift – 3120796 50
- TRANSFER OF OWNERSHIP 52
Verwandte Produkte und Handbücher für Spezialmaschinen Jlg 15VPSP Operator Manual
(122 Seiten)
(78 Seiten)
(44 Seiten)
(92 Seiten)
(192 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.047 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern