Jlg 10MSP Operator Manual Bedienungsanleitung PDF herunterladen (Seite 23)

SECTION 2 - PREPARATION AND INSPECTION

3121227 – JLG Lift – 2-5

7. Function Check - Check all machine controls for opera-

tion. (See Section 2.5 on page 2-8)

If optional equipment is installed on this machine refer to Section 3

for specific Pre-Start Inspection and Operation instructions.

2.4 DAILY WALK-AROUND INSPECTION

Begin the “Walk-Around Inspection” at item one (1) as noted on

the diagram (See Figure 2-1. on page 2-6). Continue around

machine checking each item in sequence for the conditions listed

in the following check list.

TO AVOID POSSIBLE INJURY, BE SURE MACHINE POWER IS “OFF” DUR-

ING “WALK-AROUND INSPECTION”.

DO NOT OPERATE MACHINE UNTIL ALL MALFUNCTIONS HAVE BEEN COR-

RECTED.

DO NOT OVERLOOK VISUAL INSPECTION OF THE BASE FRAME

UNDERSIDE. CHECK THIS AREA FOR OBJECTS OR DEBRIS WHICH

COULD CAUSE EXTENSIVE MACHINE DAMAGE.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 95 96

Keine Kommentare

Jlg 10MSP Operator Manual Bedienungsanleitung Seite 23